WAGO Power Supply 100-240v Output DC 24v/1.3A
| Phases |
1 |
| Nominal input voltage Ui nom
|
1 x AC 100 … 240 V |
| Input voltage range |
1 x AC 85 … 264 V; DC 125 … 375 V |
| Input voltage derating |
-2 %/V (< 100 VAC); -1.33 %/V (< 140 VDC) |
| Nominal mains frequency range |
47 … 63 Hz; 0 Hz |
| Input current Ii
|
≤ 0.6 A |
| Inrush current |
≤ 20 A |
| Power factor |
≥ 0.5 |
| Power factor correction (PFC) |
Passive |
| Mains failure hold-up time |
≥ 70 ms |
| Nominal output voltage Uo nom
|
DC 24 V (SELV) |
| Output voltage range |
DC 22 … 26 V (adjustable) |
| Default setting |
DC 24 V |
| Nominal output current Io nom
|
1.3 A |
| Nominal output power |
31.2W |
| Deviation |
≤ 1 % |
| Deviation, dynamic load change 10 … 90 % |
≤ 1 % |
| Residual ripple |
≤ 100 mV (peak-to-peak) |
| Overload behavior |
Constant power (in overload range: 1.05 … 1.35 x Io nom); Shutdown and automatic restart in the event of a short circuit or permanent overload |
| Signaling |
1 x LED DC OK (green) |
| Operation status indicator |
Green LED (Uo) |
| Power loss Pl
|
≤ 0.43 W |
| Power loss (max.) Pl (max.)
|
5.5 W (100 VAC / 24 VDC; 1.3 A) |
| Efficiency (typ.) |
87 % (230 VAC); 82 % (110 VAC) |
| Internal fuse |
T 1 A / 250 VAC |
| Backup fusing (required) |
An external DC fuse is required for the DC input voltage. |
| Backup fusing (recommended) |
Circuit breaker: 6 A (C characteristic), 10 A (B characteristic) or higher |
